How To Remove Broken Light Bulb Stuck In Socket

June 02, 2019

Step 2 Hold the socket with a pair of pliers on the exterior of the socket. Break off any remaining glass being very careful while doing so.

How To Remove A Broken Light Bulb Base From A Socket Youtube

Cut the potato in half and press it firmly against the socket.

How to remove broken light bulb stuck in socket. Use gloves eye protection and a pair of pliers to break away any remaining glass. Make sure you grip the base of the bulb filament firmly. The potato should allow the base of the bulb to turn while the socket stays still.

Cut the potato in half firmly press it against the socket and begin twisting counter-clockwise. Vacuum the insides to remove any shards of broken glass from the shattered bulb. Then twist it counter-clockwise.

Wearing protective leather gloves chip off any shards remaining around the metal base of the bulb. The jagged edges will stick to the potato preventing it from cutting you. This is to clean and remove anything that is on the inner threads of the socket so the next bulb that burns out doesnt get stuck in the future.

Allow it to set for a few minutes and reach crevices. Yes youve heard this right. When light bulbs breaks in the socket it can be hard to remove the bulb base that remains.

You may have to wipe up any potato. Lightly spray a lubricant such as WD-40 at the base of the bulb. Halve a potato and then stick the raw side into the broken light bulb.

Place a new light bulb in the socket and turn clockwise gently. Turn the power off and let the bulb cool Unplug your lamp or turn off the switch and wait about two minutes for the bulb to cool. Next press it firmly into the socket.

Start by removing all glass fragments and then slice a large potato in half. You can use a potato to remove a broken bulb from its socket. Turn the electrical power off to the socket by turning off the breaker at the main electrical panel box.

Use a damp rag or leather glove and gently twist the bulb counter clockwise to remove it. This video will show you how to safely removed the stuck light bu. Cut the tape and make a loop Cut a two-foot-long strip of duct tape.

Continue twisting the bulb counter-clockwise to remove it from the socket. This is a tried and true method of removing a stuck light bulb from the socket. While you are doing this the base will break free from the threads.

If you dont have room for a regular pair of pliers use a pair of needle-nose pliers and grasp the top edge of the socket. Use a pair of needle-nose pliers for gripping. Step 3 Insert a pair of needle-nose pliers into the center of the base.

If these above-mentioned methods dont work you can use a potato to safely remove a broken bulb from its socket. Once the broken bulb socket is removed then it is best to clean the light socket with a clean dry cloth.

6 Ways To Remove Broken Light Bulb From Socket Youtube